|
Visio 45-60 |
This equipment has been design to process all Letterpress
plates. The VISIO is a compact unit, integrating all the plate
processing steps required after exposure in a modern in line
format and comprises a flat washout section, in line dryer and
in line post exposure. An optional exposure unit, fitted under
the pre-dryer section, may be specified to provide a total
process solution!
The Visio comprises a washout section followed by an in-line
dryer and in-line post-exposure section.
Relief washout is performed by one orbital brush
followed by a single rotary brush and a sponge roller to
ensure the plate is dry touch before automatic transfer into
the dryer.
Transfer of metal backed plates through the unit is
simple and automatic requiring no pre preparation of the plate
or transport bars. For polyester plates an optional sticky
faced carrier plate is available to pre mount the plates for
transfer.
As with most modern process equipment, all the
sequences are micro processor controlled.
An optional exposure may be specified fitted under the
pre-dryer and comprises a slide mounted vacuum drawer complete
with vacuum sheet. The UV fluorescent exposure lamps are
fitted in a separate pull out drawer above the vacuum drawer
for easy service access. For maximum security the control of
the exposure section is totally independent from the
processor.
|
 |
 |
|
General
Data |
| Maximum Plate Size in Inches |
18" x 24" |
| Maximum Plate Size in Cm |
45 x 60 cm |
| Solvent Tank Capacity |
45 Liters 12 Gallons |
| Electrical Requirement |
230/400v
50/60 Hz 3 Ph + N + Ground |
| Electrical Power |
7 kW |
| Outside Dimensions L/W/H in
Cm |
320 x 100 x
100 |
| Outside Dimensions L/W/H in
Inches |
125" x
40" x
40" |
| Weight |
450 kg |
|
