|
Linea 30-40 |
The LINEA 30/40 is a compact, In Line plate processor designed
for processing solvent wash, sheet photopolymer plates up to 7
mm gauge ( 0,270”) and is compatible with all type of solvent
( Chlorinated and unchlorinated ).
Combining both high plate quality and excellent
productivity this equipment has been designed with the busy
plate maker in mind being both easy to use and dependable.
Fully automated, this equipment adapts all washout parameters
to obtain the best result and will satisfy the most demanding
customers.
The LINEA
30/40 comes complete with an exit table including cold air
circulation. Formation of the plate relief is carried out by three
flat orbital motion brushes, positioned automatically
according to the plate parameters entered by the operator.
Surface and back cleaning is by dedicated rotary brushes fed
with fresh solvent to ensure a perfect result.
Solvent circulation is specially designed to guaranty
optimum replenishment. Even a special cleaning cycle is
included to maintain plate quality at the touch of a button.
Washout solvent temperature is settable from 20 to 50 °C and
is closely regulated by a special heater system. As with all
solvent equipment an exhaust device is fitted to remove
solvent fumes at source to avoid unwanted odors in the working
area.
The control system is based on dependable PLC logic and
touch screen. Plate transport is via
a pin bar which can be easily adapted to different pitches
according to the punch standard used. A plate punch, suitable
for the LINEA, is available from SG as a separate unit.
|
 |
 |
|
General
Data |
| Maximum Plate Size in Inches |
30" x 40" |
| Maximum Plate Size in Cm |
76 x 102 cm |
| Solvent Tank Capacity |
70 Liters
18.5 Gallons |
| Electrical Requirement |
230/400v
50/60 Hz 3 Ph + N + Ground |
| Electrical Power |
4 kW |
| Outside Dimensions L/W/H in
Cm |
270 x 131 x
100 |
| Outside Dimensions L/W/H in
Inches |
107" x 52" x
40" |
| Weight |
550 kg |
|
