310

                                                                            Plate size - 24" x 30" (610 x 762mm)

RELIABLE PERFORMANCE
SHIFT AFTER SHIFT, AND DAY AFTER DAY,
FOR YEARS OF HIGH PRODUCTIVITY.
     The 310 has a solidly constructed, corrosion resistant frame with a stainless steel exterior. Careful planning has gone into the selection of all electronic and mechanical components based on proven performance, reliability, and domestic availability. in the unlikely event of parts replacement electrical and mechanical components are easily accessible through removable service panels. The electrical system employs circuit breakers throughout.

Imaging Accuracy Time After Time
     Imaging accuracy and consistent exposure are assured. The 310 employs very high intensity (V.H.O.) "rapid start" UV lamps. Lamp preheat circuitry insures that exposures remain consistent from plate to plate as well as significantly extending lamp life.
     Accurate exposure times (including front and back exposure) are achieved by the system's use of separate digital timers. The exposing section employs a black anti-halation vacuum board with vacuum attenuation to assure consistent exposures and quick drawdown without troublesome "hot spots". A roll of vinyl vacuum cover sheet is built-in Sheet replacement, when necessary , is easily made by advancing a new section. An automatic work light is included to provide easy inspection for possible dust prior to exposure, A lamp hour meter is provide to monitor lamp replacement and schedule maintenance.

A Sharper, Cleaner Image With Thorough Washout.
     The corrosion resistant washout section of the 310 is equipped for "alternate solvents" and has been designed to insure complete removal of unexposed photopolymers from plates. The 310 is designed to run these solvents cleaner with less polymer residue buildup. The 310 features a true drum to drum replenishment system to insure consistent washout times. To thoroughly rinse the plate clean, fresh solvent is incorporated at the end of the washout cycle - after the drum is raised from the process solvent. Other primary benefits: easily adjustable brush to drum gap; high velocity in-tank exhaust purge reduces odors; "integral containment dam" for spill control; two counter rotating brushes; and the system is monitored to maintain all solution levels and for all ventilating exhaust operations. All working parts in the washout section are corrosion resistant.

Efficiency Plus In A 3 Drawer Drying Section
     The dryer utilizes high velocity cross flow recirculation to insure gauge uniformity, dimensional stability, and rapid drying times. The system employs an adjustable digital temperature control that is highly accurate to insure consistent temperatures.
 

The Finishing Touch Delivers the Final Product of Excellence
     Finishing uses germicidal frequency ultra violet lamps to detack the dried plate. This finishing technique has been proven to provide the most consistent finishing across the plate, and the plate to plate. For lamp inspection there are viewing ports with protective UV filters.
 

Features: Easy operation with simple operator panel.  Frequency Specific V.H.O Exposure lamps with filament preheat circuit.  Excellent plate quality assured by counter rotating brushing action. Automatic Plate Rinse with fresh solvent at cycle end. 11 brush settings for plate thickness adjustment from the front panel.  Light Finisher with filament pre-heat circuit for extended lamp life.  3 Drawer Dryer high velocity cross flow circulation for gauge uniformity.  Class leading service access to all components. Maximum plate size 24’’ x 30’’ Plate gauge 0.045’’ to 0.250’’

Some Technical Data 310
Dimensions (overall length x depth x height)	85’’ x 44’’ x 48’’
Electrical Supply	220 v 3 phase (+10% -5%) 60 Hz
Power	25A, 4 wire with ground
Air	90 psi @ 7 CFM Dry filtered 1/4” NPT
Exhaust Out	6’’ vent 550 CFM free air
Weight	1815 Ibs
Plate type	Solid Flexo photopolymer
Solution type	Various (must specify with order)
Recommended room Temp.	65 to 77° F
Settable Solution Temp.	Optional
Process tank	13 US gallons
Noise	less than 75dbA

Note : please specify you power requirements with your order - If power out of range +10%/-5% is required a transformer is needed.